Table of Contents
Advertisement
This chapter describes user tools in the Scanner Features menu. For details on
how to access Scanner Features, see "Accessing User Tools".
General Settings
This section describes the user tools in the General Settings menu under Scanner
Features.
Default settings are shown in bold type.
❖ Switch Title
Sets index to use when the list of receivers from the machine is displayed.
The default setting is Title 1.
❖ Update Delivery Server Destination List
Press [Update Delivery Server Destination List] to update the receivers from the
delivery server. To use this function, it is necessary to set [Delivery Option] to
[On].
❖ Search Destination
Select an object receiver to search in the default state from the address book
of this machine of from LDAP server.
To search from LDAP server, it is necessary to register the LDAP server in
[System Settings] and set [LDAP Search] to [On].
The default setting is Address Book.
❖ TWAIN Standby Time
When the machine is being used to send e-mail or a file, or functioning as
Document Server or a network delivery scanner, a scanning request to the
machine as a TWAIN scanner will switch the machine to the network TWAIN
scanner function. This setting determines the delay until the machine switch-
es to the network TWAIN scanner function.
The default setting is Set Time, 10 second(s).
• Set Time: 10 second(s)
When [Set Time] is selected, you can enter the delay time with the number
keys (3-30 seconds). The machine will switch to the network TWAIN scan-
ner function when the time set here passes after the last key operation.
• Immediate
When [Immediate] is selected, the machine will switch to the network
TWAIN scanner function at once.
❖ Destination List Display Priority 1
Select a destination list to be displayed when the machine is in the initial state.
You can select either [E-mail / Folder] or [Delivery Server].
The default setting is Delivery Server.
6. Scanner Features
195
Advertisement
Table of Contents
