Change Log; Firmware Version 1.0.9.3; Firmware Version 1.0.8.7; Firmware Version 1.0.5.11 - Grandstream Networks HT812 Administration Manual

CHANGE LOG

This section documents significant changes from previous versions of admin guide for HT812/HT814. Only
major new features or major document updates are listed here. Minor updates for corrections or editing are
not documented here.

Firmware Version 1.0.9.3


Added feature "Custom Certificate". [Custom Certificate]

Added feature "Use P-Access-Network-Info Header". [Use P-Access-Network-Info Header]

Added feature "Use P-Emergency-Info Header". [Use P-Emergency-Info Header]

Add support for call waiting tone to be repeated while the caller is still calling.

Added feature "Conference Party Hangup Tone" when "Special Feature" is set to MTS.

Add support for HTTPS based on TLS v1.2

Firmware Version 1.0.8.7


Added [MTS] to Special Feature.

Added support for [Russian] in Web UI and IVR.

Added support for upgrade device via [FTP/FTPS] server.

Added support to have the call waiting tone through SIP INFO.

Added support for Hunting Group on HT812 Web UI.

Added feature "Validate Server Certificates". [Validate Server Certificates]

Added support for [DDNS]

Added feature Blacklist for Incoming Calls. [Blacklist for Incoming Calls]

Added support for [Telnet]

Added feature [Play busy/reorder tone before Loop Current Disconnect]

Firmware Version 1.0.5.11


Changed default "Upgrade Via" from HTTP to HTTPS. [
PROTOCOL UPGRADING AND PROVISIONING
] [

Added the ability to schedule [

Added support for [SNMPv3]

Added support for 3 level access through RADIUS authorization (Admin, User and [viewer])

Added option to customize number of failed [Web Access Attempt Limit] to access web GUI

Added option to customize idle time to logout the web access with [Web Session Timeout]

Added option to disable WAN side ports [Black List for WAN Side Port]

Added feature "Caller ID Fetch Order" option under FXS port settings. [Caller ID Fetch Order]

Added feature "Enable High Ring Power" option under FXS port settings. [Enable High Ring Power]
]
Automatic Reboot
]
HT812/HT814 Administration Guide
Version 1.0.9.3
Upgrade via Upgrade Protocol
] [
UPGRADE
] [
P a g e | 8