Grandstream Networks HT812 Administration Manual page 36

Always Skip the Firmware
Check
Disable SIP NOTIFY
Authentication
Authenticate Conf File
Validate Server
Certificates
SIP TLS Certificate
SIP TLS Private Key
SIP TLS Private Key
Password
Custom Certificate
(Private Key + Certificate)
Enable TR-069
ACS URL
ACS Username
ACS Password
Periodic Inform Enable
Periodic Inform Interval
Connection Request
Username
Connection Request
Password
Configures the HT812/HT814 to skip the firmware check, when this option is
selected the HT812/HT814 will always skip searching for a new firmware.
Disables the SIP NOTIFY Authentication on the ATA adapter. If set to "Yes",
the ATA adapter will not challenge NOTIFY with 401. Default is No
Authenticates configuration before being accepted. This protects the
configuration from unauthorized modifications. Default is No.
This feature allows users to validate server certificates with our trusted list of
TLS connections. Default is enabled.
The device needs to reboot after changing the setting.
Specifies SSL certificate used for SIP over TLS is in X.509 format. The
HT812/HT814 has built-in private key and SSL certificate.
Specifies TLS private key used for SIP over TLS is in X.509 format.
Specifies SSL Private key password used for SIP Transport in TLS/TCP.
Allows users to update to the device their own certificate signed by custom
CA certificate to manage client authentication.
Sets the ATA adapter system to enable the "CPE WAN Management
Protocol" (TR-069). Default setting is No.
Specifies URL of TR-069 Auto Configuration Servers
(e.g., http://acs.mycompany.com), or IP address.
Enters username to authenticate to ACS.
Enters password to authenticate to ACS.
Sends periodic inform packets to ACS. Default is No
Sets frequency that the inform packets will be sent out to ACS.
Enters username for ACS to connect to the HT812/HT814.
Enters password for ACS to connect to the HT812/HT814.
HT812/HT814 Administration Guide
Version 1.0.9.3
P a g e | 35