Locomotive Operation And Maintenance; Adjusting The Volume Using The Lionchief Remote - Lionel LionChief Plus Owner's Manual

Locomotive operation and maintenance

Adjusting the volume using the LionChief remote

T
o turn off the locomotive's background sounds, slide the SOUND switch to the OFF position.
Refer to Figure 1 on page 5 for the location of this switch.
The overall volume of the sounds in your locomotive can be adjusted, but this requires the
use of the LionChief remote (in remote operation mode). To enter Volume Control Mode, place
the remote on a flat surface. Using one hand, press the HORN and BELL buttons simultane-
ously. After three seconds, the remote's red LED will begin to flash, acknowledging that you are
in volume adjustment mode. Keep the HORN and BELL buttons depressed.
Using your other hand turn the speed control knob up or down to adjust the volume to your
preference. Release the HORN and BELL buttons to exit volume adjustment mode.
13