Assembly Instructions - AeroPilates 55-5602 Owner's Manual

ASSEMBLY INSTRUCTIONS

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Customer Care section and order the part
needed, e-mail us at customer.care@staminaproducts.com, or call us toll free at 1-800-375-7520
(in the U.S.). Our Customer Care Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central
Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
NOTE: The AeroPilates® Precision Series Reformer 610 (55-5610) is not included with the
AeroPilates® Precision Series Cadillac (55-5602).
STEP 1
Remove the FOOTBAR(32) and PULLEY RISERS(16) from the AeroPilates® Precision Series
Reformer 610 by unscrewing LOCKING KNOBS(41). Pull to remove the FOAM PADS(27).
STEP 2
Refer to the illustration. Remove the four BUTTON HEAD BOLTS(M8x1.25x15mm)(77) and
WASHERS(M8)(86) from the REAR LEG(3) on the outside on both sides.
AeroPilates® Precision Series
Reformer 610 (55-5610)
8