Advertisement
1
TO SET THE AeroPilates PRO XP686 INTO THE
1.
Remove the FOOTBAR(20) or the FREE-FORM CARDIO REBOUNDER(76) (if installed).
2.
Remove the SHOULDER PADS(56).
3.
Refer to the inset drawing. Pull the SPRING PIN(39), then slide the LEFT PULLEY SLIDER(36) down
and turn it to point the front. Lock the LEFT PULLEY SLIDER(36) in the locking hole with the SPRING
PIN(39). Repeat on other side.
4.
NOTE:
If you want to use the FOOT STRAP(73), swing the FOOT STRAP(73) up above the Wooden
Platform.
Carefully place the
Operational Instructions
3
Locking Hole
2
CADILLAC
CUSHIONS(150) onto the Aluminum Rails of AeroPilates PRO XP686.
(AeroPilates PRO XP686)
CADILLAC
MODE:
4
4
Aluminum Rail
Advertisement
