Arrow EH54-A Owner's Manual & Assembly Instructions page 23

Step 10
BP23
1
From inside the building, put the
bottom of the door assembly (on your
right when you are inside the build-
ing) behind door jamb into the front
frame track.
2
Position the top of the door so that
the holes in the door line up with the
holes in the door slides.
3
Fasten the door to the door slides
using two #10Bx1/2" (13 mm) screws
per door slide.
NOTE
The holes in the door slides allow
you to adjust the door. Place the
door in the middle holes.
4
Attach door handle lock bracket
to right hand door jamb using two
bolts and nuts.
Keep this Owner's Manual
and Assembly Instructions
for future reference.
Parts Needed For
Door Installation & Adjustment
Gable
Door Track
Door Slide
Front Frame Track
Adjustment Holes
Adjustment Holes Allow
Door to Meet Jamb Evenly
Along Its Length
STEP
Jamb
4
Door
Horizontal Door Brace
STEP
7972
23
Door Assembly (1)
7972 Door Handle
Lock Bracket (1)
STEP
2
1
Door Slide
#10Bx1/2" (13 mm)
Screw
STEP
3
Door