Table of Contents
Advertisement
Step 1
BP14
The door track assembly supports
the sliding door and reinforces the
front wall. The roof beam joins the
two gables and supports the roof
panels. The roof beam is made up
of two pieces fastened together.
Hint: The holes in the top side of
the door track are for fastening the
gable to the top of the front wall in a
later step.
1
Position door slides onto the legs,
from the end of door track, as shown
in the end view.
2
Place the roof beam angle, back-
to-back, with the roof beam and
fasten together using six screws.
3
Set this piece aside for later use.
END VIEW
Assembled
End
View
Parts Needed For
Door Track/Roof Beam Assembly
9729 Roof Beam
9730
STEP
1
STEP
2
14
9730 Door Track (1)
9729 Roof Beam (1)
9731 Roof Beam Angle (1)
66769
9731 Roof Beam Angle
Long Leg
on Top
Short Leg
on Bottom
Advertisement
Table of Contents
