Table of Contents
Advertisement
Step 6
BP19
The gables go on top of the front and
rear walls to support the roof beams.
1
Fasten the side wall angles
across the top of the side panels us-
ing screws. Side wall angles must
overlap rear wall angle in corners.
NOTE
The gables are packed nested to-
gether and might be mistaken
as one piece. Carefully separate
them before continuing.
2
Lift and fasten a right and left
gable, under angle at corner, to the
door track with screws.
3
Join the left and right gables to-
gether using bolts and nuts in the
bottom 2 holes.
Repeat Steps 2 & 3 for the opposite
end of building.
4
Fastent the roof beam assembly,
small holes on top, to the gable legs
of the front gables, with bolts & nuts.
5
Fasten the other end of the roof
beam to the gable legs of the rear
gables.
Parts Needed For
Angles/Gables/Roof Beam
9728
STEP
4
STEP
2
Gable
9449
9448
9449
19
9728 Side Wall Angle (2)
9448 Left Gable (2)
9449 Right Gable (2)
Roof Beam Assembly (1)
STEP
3
9448
9728
STEP
Roof Beam Assembly
5
STEP
1
Advertisement
Table of Contents
