Maintenance; Safety Recommendations - Kioti KRX19542H Operator's Manual

Kl2042 series. 42 inch cut riding mower
Table of Contents

Advertisement

9. If the engine speed is lowered while you are cutting grass or if the cutting deck
tends to get blocked, you should reduce the forward speed since this may be
too high for the condition of the grass. If the problem persists, the probable
causes are either badly sharpened blades or deformed wings.
10. Be very careful when mowing near bushes or kerbs as these could distort the
horizontal position of the cutting deck and damage its edge as well as the
blades.

6. MAINTENANCE

6.1 SAFETY RECOMMENDATIONS

WARNING!
ignition key and read the relevant instructions. Wear adequate clothing & work
gloves whenever your hands are at risk.
WARNING!
Faulty or worn-out parts must always be replaced and not repaired. Only use
original spare parts: The use or non-original and/or incorrectly fitted parts will
compromise the safety of the machine, may cause accidents or personal
injuries for which the Manufacturer is under no circumstance liable or
responsible.
IMPORTANT
pollutants in unauthorised places!
WARNING!
described in this manual must be carried out by your Dealer or a specialized
Service Centre. Both have the necessary knowledge and equipment to ensure
that the work is done correctly without affecting the safety of the machine.
All and any operations performed in unauthorised centres or by unqualified
persons will totally invalidate the warranty & all obligations & responsibilities of
the manufacturer.
You must go to a specialised Service Centre or contact your Dealer if the
following are malfunctioning:
– the brake;
– the engagement and stop of the blades;
– the drive engagement in forward and in reverse gears.
23
Before cleaning or doing maintenance work, take out the
Never use the machine with worn or damaged parts.
Never dispose of used oil, fuel, batteries or other
Any adjustments or maintenance operations not
2
1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kl2042

Table of Contents