Kioti KRX19542H Operator's Manual page 22

5. HOW TO USE THE MACHINE (cont)
The four different heights of the wheels
allows you to maintain a safe distance
between the cutting deck edge and the
ground.
To change the position, unscrew &
remove the screw (2) and reposition the
wheel (1) with the spacer (3) in the hole
at the desired height; then tighten the
screw (2) onto the nut (4) as far as
possible.
WARNING!
ENGINE OFF AND THE BLADES DISENGAGED.
To start cutting:
– move the throttle to «FAST»;
– raise the cutting deck as high as possible; only use the blade (
lawns, do not use the blades on stony ground or when the grass is very high.
– start moving forwards on the grass very slowly and with utmost caution, as
already described;
– regulate the cutting height and speed (
lawn (the height, density and dampness of the grass).
WARNING!
ensure safe conditions (
Whatever the conditions, always reduce the speed if you notice a drop in engine
speed – if you travel too fast compared to the amount of grass being cut, you will
not be able to mow the grass well.
Disengage the blades and raise the cutting deck as high as possible whenever you
need to get past an obstacle.
5.4.6 End of mowing
When you have finished mowing, disengage the blades, lower the engine speed
and ride the machine with the cutting deck raised as high as possible.
5.4.7 End of work
Stop the machine, move the throttle to «SLOW» and
turn off the engine by turning the key to «OFF».
WARNING!
throttle on «SLOW» for 20 seconds before stopping
the engine.
When the engine has stopped, close the fuel tap (1).
WARNING!
machine unattended!
IMPORTANT
«ON» position or «HEADLIGHTS ON» when the engine is not running.
19
This work is to be done to both wheels, WITH THE
When cutting on sloping ground, reduce your speed to
1.2 - 5.5).
To avoid backfire, position the
Always take out the ignition key before leaving the
To keep the battery charged, do not leave the key in the
4
1
4.6) considering the conditions of the
3
2
4.5), on grass
1