Kioti KRX19542H Operator's Manual page 15

4.4 PARKING BRAKE
This brake stops the machine from moving when it has been parked.
There are two positions:
«A» = Brake off
«B» = Brake on
– The brake is applied by pressing the pedal right
down (4.21 or 4.31) and moving the lever to
position «B». When you take your foot off the
pedal it will be blocked by the lever in the
lowered position.
– To disengage the parking brake, press the pedal (4.21 or 4.31). The lever will
return to position «A».
4.5 BLADE ENGAGEMENT AND BRAKE CONTROL
The mushroom switch allows you to engage the blades using the electromagnetic
clutch:
B
4.5
A
4.6 CUTTING HEIGHT ADJUSTMENT LEVER
There are seven positions for this lever (shown as
«1» to «7» on the label), which correspond to
various heights between 3 and 8 cm.
– To go from one position to another, move the
lever sideways and put it back in one of the stop
notches.
Mechanical transmission
4.21 CLUTCH / BRAKE PEDAL
This pedal has two functions: during the first part of its
travel it acts as a clutch, engaging and disengaging
drive to the wheels, and in the second part it acts as a
brake on the rear wheels.
IMPORTANT
Do not keep the pedal halfway between clutch engagement or disengagement, as
this can cause overheating and damage the transmission belt.
NOTE
«A» Pressed = Blades disengaged
«B» Pulled = Blades engaged
– If you engage the blades without taking the
necessary safety precautions, the engine shuts
down and cannot be restarted (
– Blade disengagement (Pos. «A»), simultaneously
activates a brake which stops their rotation in a few
seconds.
When the machine is moving, keep your foot off the pedal.
A
B
5.2).
7
1 4.6
4.21
4.4
12