Kioti KRX19542H Operator's Manual page 21

WARNING!
engagement may cause the vehicle to tip over and the driver to lose control.
Gradually reach the desired speed using the throttle and gear lever. To change
gear, press the clutch halfway down (
Hydrostatic transmission
Disengage the parking brake and release the brake pedal (
Press the drive pedal (
progressively increasing pressure on the pedal and moving the accelerator.
WARNING!
prevent sudden engagement from causing tipping up and loss of control of
the vehicle, particularly on slopes.
5.4.3 Braking
First reduce the machine's speed by reducing the engine's r.p.m., and then press
the brake pedal (
Hydrostatic transmission
The machine already slows down considerably by just releasing the drive pedal.
5.4.4 Reverse
IMPORTANT
stopped moving.
Mechanical transmission
Press the pedal until the machine stops and then go into reverse by shifting
the lever sideways and into position «R» (
pedal to engage the clutch and then begin moving in reverse.
Hydrostatic transmission
When the machine has stopped moving, start reversing by pressing the drive
pedal in direction «R» (
5.4.5 Grass cutting
Adjust the position of the anti-
chipping wheels according to how
the ground is.
The anti-chipping wheels are used
to reduce the risk of tearing up
sections of lawn, which can occur
when the edge of the cutting deck
drags over irregular ground.
The pedal has to be released gradually, as a sudden
4.32) in direction «F» and reach the required speed by
Drive must be engaged as de scribed (
4.21 or 4.31) to slow down the machine until it stops.
Reverse must be engaged only when the machine has
4.32).
A = 10 mm
A = 30 mm
4.21).
4.22). Gradually release the
1
4.31).
4.32) ) to
A = 0 mm
A = 20 mm
A
18