Network - Snmp Window - Microsemi SyncServer S600 User Manual

Chapter 4
Navigation Windows
The SNMP engine ID is displayed for the user's convenience. The SNMP MIB files
for use with the SyncServer can be downloaded on this page.
Figure 4-16. Network - SNMP Window
Network - SNMP Trap Configuration
Use this window add or edit SNMP trap recipients
The following parameters can be configured:
IP Address - up to 10 trap managers can be added

Trap Version: v2 or v3

User / Community, 1-32 characters

Authentication Phrase (v3 only), 1-99 characters

Privacy Phrase (v3 only, privacy uses AES128), 1-99 characters

Authentication Encryption: MD5 or SHA (v3 only)

90 SyncServer 600 Series User's Guide 098-00720-000 Revision D1 – February, 2018