Factory Defaults; Network; Network > Ethernet Parameters; Network > Snmp Parameters - Microsemi SyncServer S600 User Manual

Appendix B Specifications and Factory Defaults

Factory Defaults

Factory Defaults

Network

Table B-30. Network > Ethernet Parameters
Description
Speed
IPv4
IP6v
Address (IPv4)
Subnet (IPv4)
Gateway (IPv4)
Address (IPv6)
Subnet (IPv6)
Gateway (IPv6)
Table B-31. Network > SNMP Parameters
Description
sysLocation
Read Community
SysName
Write Community
sysContact
Name (v3 User)
290 SyncServer 600 Series User's Guide
Default Value
Auto
IPv4 IPv4 uncheck | IPv4 check/DHCP | IPv4
uncheck/static
IPv6 uncheck/ IPv6 uncheck | IPv6 check/ Autoconfig
autoconfig /static
IPv6 check/Autoconfig uncheck /DHCP |
IPv6 check/Autoconfig check/static |
IPv6 check/Autoconfig check/DHCP
Blank (no value)
Blank (no value)
Blank (no value)
Blank (no value)
Blank (no value)
Blank (no value)
Default Value
unknown
comm
SyncServer
Comm1
admin@
localhost
Blank (no val
Value Range
Auto | Full_100 | Full_1000
check/Static
uncheck/static |
[ <ipv4_address> ]
[ <ipv4_address> ]
[ <ipv4_address> ]
[ <ipv6_address> ]
[ <ipv6_address> ]
[ <ipv6_address> ]
Value Range
[ <printable ASCII> ], 1 - 49 chars
[ <printable ASCII> ], 1 - 49 chars
[ <printable ASCII> ], 1 - 49 chars
[ <printable ASCII> ], 1 - 49 chars
[ <printable ASCII> ], 1 - 49 chars
[ <printable ASCII> ], 1 - 49 chars
098-00720-000 Revision D1 – February, 2018