It is important to confirm the device is talking to the controller; this can be done by verifying status lights on the block just below the aux power ports
3
and just above the first M12 I/O ports.
Functional
Communication
Is Established:
Troubleshooting Tips:
n
Some controllers require a power cycle of the device or the controller or both before the communication is established.
n
Make sure there are no IP Address conflicts between devices.
n
Ensure that the devices are connected on the same LAN or hardwired network.
n
EtherNet/IP DLR (Device Level Ring) capable devices ship with the default setting, DLR enabled. Some controllers may require that the device has
this functionality disabled before communication can be established.