Download Print this page

Vivotek AW-FET-053C-120 Quick Installation Manual page 2

Outdoor unmanaged poe switch

Advertisement

INSTALLATION
Use the included M10 hex socket screws to secure the power box to a pole-mount or corner mount bracket.
AM-314
AM-315
AM-414
The mounting hole definition is illustrated below. The same mounting hole pattern apply to all pole-mount and corner-
mount brackets.
Outdoor PoE switch:
AW-FET-060C-065
IMPORTANT:
1. If the need should arise for connecting two outdoor switches, use the uplink ports #4 or #5. If you use PoE ports for
cross-switch connections, the 12KV surge protection will not apply.
2. The cabinet must be grounded using a ground wire between the
ground screw and earth ground.
All specifications are subject to change without noice.
Copyright © 2018 VIVOTEK INC. All rights reserved.
VIVOTEK INC.
6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C.
|T: +886-2-82455282| F: +886-2-82455532| E: sales@vivotek.com
3/4" conduit
VIVOTEK USA, INC.
2050 Ringwood Avenue, San Jose, CA 95131
|T : 408-773-8686 | F : 408-773-8298 | E : salesusa@vivotek.com
M10
1.5m
VIVOTEK Europe
Randstad 22-133, 1316BW Almere, The Netherlands
T: +31(0)36-5298-434 E: saleseurope@vivotek.com

Advertisement

loading