View Alerts; The Help, Or "I" Button, The Niagara Scx Web Interface, And Their Alert Settings - Cisco 2000 User Manual

N SCX W I
IAGARA EB NTERFACE

View Alerts

All alerts that are defined on the Cisco Digital Media Encoder 2000 Alerts page are logged on the
View Alerts page when those alerts occur. Once a user has cleared the alert using the Help, or
i button, on the front panel of the Cisco Digital Media Encoder 2000, the alert is cleared from the
View Alerts log page.
Alternatively, the Cisco Digital Media Encoder 2000 system informs you of an alert when the Alarm
Indicator Light on the front panel of the system turns red. When this occurs on the Cisco Digital
Media Encoder 2000, to determine what the alert is, you must press the Help, or "i,"button, which
will cycle the alert occurring.
Please see the The Help, or "i," button, the Niagara SCX Web Interface, and their Alert Settings
section set forth later in this document.
The Help, or "i" Button, the Niagara SCX Web Interface, and their Alert
Settings
The Help button, or "i," button, on the front panel of the Cisco Digital Media Encoder 2000, as
stated above, allows you to view the alerts currently occurring in the Cisco Digital Media Encoder
2000. Directly below is a diagram of the Help, or "i," button, which is located on the front panel of
the Cisco Digital Media Encoder 2000. The Help, or "i," button allows you to view alerts of many
types that can occur on the Cisco Digital Media Encoder 2000 based on the types of alerts you
request of the system to notify you.
NOTE: An alert is not necessarily an indication of a fault occurring. You might want to be made
aware of changes in the system, which have nothing to do with errors that could occur on a Cisco
Digital Media Encoder 2000. For example, you might want a notification set to signal you as to
when an encoder has started or when as to when an encoder has stopped.
To view alerts occurring, you have a choice to view the alerts through use of the Cisco Digital Media
Encoder 2000 or the Niagara SCX Web Interface. If you use the Web Interface, the following is the
first page of the Niagara SCX Web Interface you will see to View Alerts.
Cisco Digital Media Encoder 2000 User Guide 129