Using The Data Card To Collect Data; Cleaning And Maintenance - ResMed Positive Airway Pressure Device S8 Escape II User Manual

Using the Data Card to Collect data

If your clinician needs to review your treatment, they will ask you to use the Data
Card to copy data from your S8 Escape II, and to return the card to them. The
Data Card will be provided in a protective folder.
Data that is copied to a Data Card is still stored and available on the S8 Escape II.
Copy data onto the Data Card
1. Switch on the S8 Escape II and wait until you see the standby (Ramp) screen.
2. Hold the Data Card with the arrow facing up and insert it into the Data Card
slot until it stops. Data copying starts automatically.
The "Card Inserted Please Wait" message is displayed on the S8 Escape II
LCD while data is being copied. Copying takes approximately five seconds.
The "Copy Complete Remove Card" message is displayed on the LCD when
copying has finished.
3. Remove the Data Card by gripping the end of the Data Card and pulling it out.
4. Store the Data Card in its protective folder when not in use.
5. Return the card in its protective folder to your clinician using a postal
envelope.
Using the Data Card to Update Settings
If your clinician has provided a Data Card with new device settings:
1. With the device in standby (Ramp) mode, insert the Data Card into the slot
on the Data Card module. Updating will start automatically.
The "Card Inserted Please Wait" message is displayed on the LCD while
updating is in progress. Updating takes approximately five seconds.
The "Settings Success Remove Card" message is displayed on the LCD if
the settings were updated successfully.
Note: This message only appears once. If you re-insert the Data Card after
you have updated your settings, this message is not displayed.
2. Remove the Data Card from the S8 Escape II.
3. Store the Data Card in its protective folder when not in use.
WARNING
!
If your clinician has told you to use this Data Card to update the settings on
your device and the "Settings Success" message does not appear, contact
your clinician immediately.

Cleaning and Maintenance

WARNING
!
Beware of electric shock. Do not immerse the unit or power cord in water.
Always unplug the unit before cleaning and be sure it is dry before plugging
back in.
8