Edision primo IP S2 Manual

Congratulations on purchasing an EDISION primo IP S2
Please note that this information is valid at the time of publication.
Current information and detailed user manuals can be found on the Internet at: www.edision.gr
1
Unpacking
146mm
Receiver primo IP S2
Notes: The front is factory fitted with a protective foil
which can be removed easily and with caution. (Protective foil only for devices with display)
The scope of delivery may also include parts not listed here
Front Panel
1 POWER button: Activates/Deactivates the device
2 CH- / CH+ buttons: for moving in the program lists
3 Infrared sensor for the reception of remote
control commands
4 Display LED, displays current information
5 Card reader
Back Panel
6 LNB IN: Connection for the coaxial cable
to the signal from the satellite system
7 S/PDIF: Audio interface for amplifier/audio console
8 ETHERNET: Ethernet port RJ45 10/100 Mbps
9 HD OUT: Connection to an HDTV quality TV
10 SCART: For connecting to a TV set,
using SCART cable [not for HD TV]
11 Connection for an adapter (DC 12V/1,0A)
Subpages
12
/ 2 x USB: Connection for USB storage devices
13 RS 232: For connecting to a PC, for receiver software update.
14 IR IN: Infrared connection port
2
Connecting and switching on
Note: For interference-free satellite TV reception,
a specialist technician must calibrate your satellite
TV system with a digital TV level meter
• Connect the receiver using HDMI cable via the
HD OUT output port to your TV's HD OUT input port
• Now connect the receiver to the satellite
antenna cable via the LNB IN input.
• Insert the batteries into the remote control.
Notes on the remote control can be found on
the back of these instructions.
• Connect the receiver to the power supply.
• The receiver starts with the BOOT process and
is operational within a short time
primo IP S2
F u l l H D S a t R e c e i v e r
Remote control with 2 AAA batteries
POWER CH- CH+
1 2
6
7
LNB IN 13/18V
S/PDIF
400mA MAX
LNB IN: Connecting
the cable to the satellite
signal
LNB IN 13/18V
S/PDIF ETHERNET HD OUT
400mA MAX
HD OUT:
Output receiver
HDMI
kabel
Documentation
3
4
8
9
HD OUT
ETHERNET
RIGHT
12
DC 12V/1,0 A
SCART
Power socket
HDMI cable
Service note
Please contact
your EDISION
specialist dealer
for any further
support
and service.
primo IP S2
5
10
11
DC 12V/1,0 A
SCART
LEFT
13 14
RS 232 IR IN
TV set connection panel
Use an HDMI input!
HDMI in
2
1
m
HD i
kabel