Operation Guide
1 Install the batteries
①
UwMic15-RX15 and UwMic15-TX15. Batteries can be
inserted in the plug-on transmitter UwMic15-SR-XLR15 in the
same manner.
②
UwMic15-SR-HM15
• Long press the power button to turn the power off.
• Slide the battery compartment cover in the direction of the
arrow, and completely pull it out.
• Insert two new AA batteries into the battery compartment
with
and
• Close the battery cover, after inserting battery.
Note:
①
Please remove the batteries from the battery compartment
when the device is not used for a long time.
②
Please always use sets of the same type of battery.
③
Replacing the batteries during operation may generate
noise. Please make sure that the unit is turned off before
replacing batteries.
2 Connect the receiver to the mic jack of a camera, camcorder
or mixer with the supplied cable.
18
polarities in the correct orientation.
• Long press the Power key to
turn the unit off.
• Slide the two catches inward
and pull out the battery
compartment.
• Insert two AA size batteries
according to the polarity
indicators and close the
compartment. Please be sure the
battery compartment is locked
securely.
Need help?
Do you have a question about the UwMic15 and is the answer not in the manual?