Panasonic AW-HR140PJ Operating Instructions Manual page 41

AW-RP50 (not supplied) (continued)
Basic operations for the menus
„ „
For detailed operations, refer to the Operating Instructions of the AW-RP50 — <Operations and Settings>.
1.
Set the MENU button to ON.
Press the MENU button and light its indicator.
2.
Select the target menu.
Press the corresponding PRESET MEMORY/MENU button, and
light its indicator.
The selected menu is displayed on the LCD panel.
3.
Change the settings using the F1 dial and F2 dial.
Use the F1 dial and F2 dial to select the menus and change the
settings.
Use the F1 dial for operations involving the items displayed on the
top line of the LCD panel.
Use the F2 dial for operations involving the items displayed on the
bottom line of the LCD panel.
p p Press the EXIT button to return the menu to its previous
hierarchical level.
p p When the down arrow "" is displayed for a setting item, it means
that the value shown will be entered and the setting reflected when
the F1 dial or F2 dial is pressed.
1. G R O UP S E L E C T
p p When the down arrow "" is not displayed for a setting item,
it means that the value shown will be entered and the setting
reflected when the F1 dial or F2 dial is turned.
R G AI N :
B G AI N :
POWER ALARM
1
1
MENU PAGE GAIN/PED R/B GAIN
6
STORE DELETE DETAIL SCENE/MODE
1
IRIS AUTO
CAMERA STATUS / SELECTION
AUTO
TELE
ZOOM
WIDE
1
± 0
F1 dial
F2 dial
± 0
F1
F2
F1 CAMERA
OSD
2 3 4 5
R/B PED AWB/ABB SHUTTER F2 EXIT
7 8 9 10
CAMERA SETUP SYSTEM USER1 USER2
PRESET MEMORY / MENU
2 3 4 5
PT ACTIVE
LOW HI
FOCUS/ OTAF PTZ/FOCUS SPEED PAN/TILT
PUSH
2
Operating Instructions
3
41