Setting The Power Supply Used By The (Power Source) - Zoom F8n Operation Manual

Setting the power supply used by the
Set the DC power supply shutdown voltage, nominal voltage and type of batteries so that the remaining power supply charge
can be shown accurately. On this menu page, you can check the voltage of each power supply and the remaining battery capacity.
1.
Press .
2.
Use to select
and press .
3.
Use to select
and press .
156
USB
,
FRC-8
,
(Power Source)
4.
Power
Use to select
Source
, and press
Power settings for the
See "Setting the power supply used" (→ P .22).
NOTE
When multiple power supplies are connected, they will be used in
the following order of priority.
1. DC power supply (Ext DC)
2. USB bus power (supplied by
3. AA batteries (Int AA)
The voltages of each power supply are shown on the display.
.
are the same as for the
)
.