Table of Contents
Advertisement
USB board
Description
USB board (for use in products equipped with N17E processors only (GTX 1070/1060)
USB board (for use in products equipped with N17P processors only (GTX 1050Ti/1050)
Before removing the USB board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the following components:
a.
Base enclosure (see
b.
Battery (see
c.
Optical drive (see
d.
Speakers (see
Remove the USB board:
1.
Open the zero insertion force (ZIF) connector (1) and release the USB board cable.
2.
Remove the two Phillips M2.0 × 4.0 screws (2) that secure the USB board to the computer.
3.
Remove the USB board (3).
Reverse this procedure to install the USB board.
52
Chapter 6 Removal and replacement procedures for authorized service provider parts
Base enclosure on page
Battery on page
38)
Optical drive on page
Speakers on page
47)
45)
48)
Spare part number
L14990-001
L14989-001
Hide quick links:
Advertisement
Table of Contents
