Table of Contents
Advertisement
Optical drive
Description
Optical drive
DVD+/-RW Double-Layer SuperMulti
●
Optical drive bracket (left side)
Optical drive bracket (right side)
Optical drive bezel
IMPORTANT:
and replacement.
Before removing the optical drive, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
3.
Disconnect all external devices connected to the computer.
4.
Remove the battery (see
Remove the optical drive:
▲
Disconnect the optical drive cable from the computer (1). Remove the Phillips M2.0 × 2.5 screw (2)
securing the optical drive in the computer, and then lift drive (3) away from the computer.
Reverse this procedure to install the optical drive.
48
Chapter 6 Removal and replacement procedures for authorized service provider parts
Make special note of each screw and screw lock size and location during removal
Battery on page
38).
Spare part number
756564-038
931583-001
931584-001
931557-001
Hide quick links:
Advertisement
Table of Contents
