Wlan Module - HP OMEN 17–an100 Maintenance And Service Manual

WLAN module

Description
WLAN assembly RT CARTIER ac 2 × 2 (for products with NVIDIA N17E (GTX 1070/GTX 1060)
Intel Dual Band Wireless-AC 9560 802.11 ac 2 × 2 WiFi + Bluetooth 5 Combo Adapter (non vPRO)
Before removing the WLAN module, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
3. Disconnect all external devices from the computer.
4. Remove the following components:
a. Base enclosure (see
b. Battery (see
c. Optical drive (see
Remove the WLAN module:
1. Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module.
NOTE:
The WLAN antenna cable labeled "2" connects to the WLAN module "Aux" terminal labeled "2".
2. Remove the Phillips M2.0 × 2.5 screw (2) that secures the WLAN module to the system board. (The WLAN
module tilts up.)
50 Chapter 6 Removal and replacement procedures for authorized service provider parts
Base enclosure on page
Battery on page
Optical drive on page
The WLAN antenna cable labeled "1" connects to the WLAN module "Main" terminal labeled "1".
45)
38)
48)
Spare part number
924813-855
LT22634-005