NEC UNIVERGE SV8100 Reference Sheet page 2

CALL FORWARD - ALL
Forwards all calls immediately.
To Set
♦
Lift Handset and press CF/A
Key or dial 741.
♦
Dial 1 to Set.
♦
Dial destination number.
♦
Replace Handset.
To Cancel
♦
Lift handset, press CF/A key or
dial 741.
♦
Dial 0 to Cancel.
♦
Replace Handset.
CALL FORWARD BUSY NO
ANSWER
Forwards calls only after 4 – 6 rings and
on busy tone.
To Set
♦
Lift Handset and press B/NA
Key or dial 744.
♦
Dial 1 to Set.
♦
Dial destination number.
♦
Replace Handset.
To Cancel
♦
Lift handset and press B/NA
key or dial744.
♦
Dial 0 to Cancel.
♦
Replace Handset.
TO SELECT RINGER TONE
The DT Series has 8 kinds of ringer tones
which you can select :
♦
Press Speaker anddial 720.
♦
Dial 1 to set Internal ring: Dial 2 to
set External ring.
♦
Dial code for desired ring pattern
(1~8).
♦
Replace Handset.
Note:
Access codes used in this reference sheet are the systems default settings.
LOGIN/LOGOUT
For IP Phones only.
To Login
♦
Enter Login code and press SET Soft
key.
♦
Enter password and press OK Soft
key.
To Logout
♦
Press PROG Soft key.
♦ Press the down arrow ↓ twice.
♦
Press LOGOFF Soft key.
♦
Press Yes Soft key.
♦
Press Exit.
MESSAGE WAIT
When calling a busy or unanswered digital
telephone :
To Set
♦
Dial 0 or press MW Soft key.
♦
Replace Handset.
The destination extension will display MW as well
as the flashing LED.
To Cancel (from originating extension)
♦
Lift Handset or press Speaker.
♦
Dial 773 for all or 771 for specific
number.
♦
Replace Handset.
To Cancel or Respond (from receiving extension)
♦
Lift Handset or press Speaker.
♦ Dial ∗0 or press MW Soft key.
♦
Either press Call or Canc Soft key.
♦
Replace Handset.
BACKGROUND MUSIC
Set/Cancel.
♦
Press Speaker.
♦
Dial 725.
♦
Press Speaker.
PROGRAMMING SPEED
NUMBERS
To Program Speed Numbers using Function
key:
♦
Press Speaker key.
♦
Dial 751.
♦
Press an available Function key.
♦
Dial 01.
♦
Enter either extension number or
external number including 0 for an
outside line.
♦
Press Speaker key.
Note:
In some cases the HOLD key needs to be
pressed before pressing the Speaker key to
hang up.
Service Code 00 will erase function from key.
To Access
♦
Press desired Function Speed
Calling key or press Speaker and
key to call number.
To Program STA Speed Numbers:
♦
Press PROG Soft key.
♦
Press STA Soft key.
♦
Dial Buffer Location (1~0, Up to 10
numbers).
♦
Enter either extension number or
external number including 0 for an
outside line.
♦
Press HOLD.
♦
Enter Name using dial pad.
♦
Press HOLD.
♦
Press Speaker key.
To Access
♦
Press DIR Soft key.
♦
Press STA Soft key.
♦
Select number by pressing the up and
down arrow Soft keys.
♦
Press DIAL Soft key.
Note:
Station and Menu Storage buffer is allocated by
your Administrator.
CALL PARK
To put your call on hold and retrieve from
any other extension:
♦
Ask caller to hold and press
TRANSFER
♦
Dial Call Park Access Code #6.
♦
Note the park slot number 01-64.
♦
Replace Handset.
To Retrieve from any handset.
♦
Lift handset or press Speaker.
♦ Dial Park retrieve Code ∗6 and Park
number 01-64.
Note:
If the slot you select is in use you will receive a
busy tone.
If the parked call is not picked up it will recall
your extension.
DISPLAY
To adjust the Display:
Press the Up Down button up or
down while the phone is idle.
SPEAKER/RECEIVER VOLUME
To adjust the Speaker/Receiver Volume:
Press the Up Down button up or
down during conversation
RINGER VOLUME
To adjust the Ringing Volume:
Press the Up Down button up or
down during ringing.