General Technical Data; Testo 905I - TESTO 905i Instruction Manual

info@Testo-Direct.com
Certification
Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark,
Estonia, Finland, France, Germany, Greece, Hungary, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland,
Portugal, Republic of Cyprus, Romania, Slovakia, Slovenia, Spain,
Sweden, United Kingdom
EFTA countries
Iceland, Liechtenstein, Norway and Switzerland
Other countries
USA, Canada, Turkey, Hong Kong
Information from the FCC (Federal Communications Commission)
This instrument complies with part 15 of the FCC Rules. Its
commissioning is subject to the following two conditions: (1) This
instrument may not cause harmful interference and (2) this
instrument must be able to accept interference, even if this could
have undesired effects on the operation.
Changes
The FCC demands that the user be informed that any changes or
modifications to the instrument that have not been explicitly
approved by Testo AG may void the user's right to use this
instrument.

9.2. General technical data

All accuracy specifications apply at a nominal temperature of 22 °C.

9.2.1. testo 905i

Feature Values
Measuring range -50 to 150 °C / -58 to 302 °F
Accuracy ± 1 digit ± 1 °C / ± 1.8 °F
Resolution 0.1 °C / 0.1 °F
Measurement rate 1/sec
Available units of °C, °F
measurement
Storage temperature -20 °C to 60 °C / -4 to 140 °F
www.
Testo-Direct
9 Technical data
17
1.888.610.7664
.com