Configuring Network Testing Settings - Dahua DH-XVR4104C-X User Manual

Step 2 Configure the settings for the alarm center parameters. See Table 5-67.
Parameter
Enable
Protocol Type
Host IP
Port
Self-Report Time
Step 3 Click Apply to complete the settings.
5.16.1.13 Configuring P2P Settings
You can manage the devices by using P2P technology to download the application and register
the devices. For details, see "5.1.4.5 Configuring P2P Settings."

5.16.2 Configuring Network Testing Settings

5.16.2.1 Testing the Network
You can test the network connection status between the Device and other devices.
Figure 5-200
Description
Enable the alarm center function.
In the Protocol Type list, select protocol type. The default is
ALARM CENTER.
The IP address and communication port of the PC installed with
alarm client.
In the Self-Report Time list, select time cycle and specific time for
uploading alarm.
Table 5-67
Local Configurations 230