Configuring Encode Settings - Dahua DH-XVR4104C-X User Manual

Parameter
Mirror
3D Denoise
Flip
Light
Scene Mode
Day & Night
Step 3 Click Apply to complete the settings.

5.5.2 Configuring Encode Settings

Step 1 Select Main Menu > CAMERA > ENCODE > Encode.
The Encode interface is displayed. See Figure 5-64.
Description
Enable the function, the left and right side of the video image will be
switched. It is disabled by default.
This function specially applies to the image which frame rate is
configured as 2 at least. It reduces the noises by making use of the
information between two frames. The bigger the value is, the better
the effect.
In the Flip list, you can select 180° to change the video image display.
By default, the setting is No Flip.
In the Light list, select Close or Enable to use the backlight
compensation or not.
Configure the white balance to adjust the general hue of the image.
The default setting is Auto.
Auto: Automatically apply white balance to different colors to

make the image color display normally.
 Sunny: Apply the threshold value to sunny environment.
 Night: Apply the threshold value to night.
 Customized: Manually adjust the Red Gain and Blue Gain values.
Configure the color and black&white mode of the image. This setting
is not affected by the configuration files. The default setting is Auto.
Color: The camera outputs color image only.

Auto: Depends on the camera, such as overall brightness and

whether there is an IR light, either color image or black&white
image is output.
B/W: The camera outputs Black and white image only.

By Time: The camera outputs image according to the configured

sunrise time and sunset time.
Table 5-23
Local Configurations 95