5.4.3 Configuring PTZ Functions
5.4.3.1 Configuring Presets
Step 1
On the Expanded PTZ Control Panel, click
The Preset interface is displayed. See Figure 5-54.
Step 2
Click the direction arrows to the required position.
Step 3
In the Preset box, enter the value to represent the required position.
Step 4
Click Setting to complete the preset settings.
5.4.3.2 Configuring Tours
Step 1
On the Expanded PTZ Control Panel, click
The PTZ interface is displayed.
Step 2
Click the Tour tab.
The Tour tab is displayed. See Figure 5-55.
Step 3
In the Patrol No. box, enter the value for the tour route.
.
Figure 5-54
.
Figure 5-55
Local Configurations 88