Marking And Playing Back Video - Dahua DH-XVR4104C-X User Manual

Step 4 Click
The grid is displayed on the screen.
 Only single-channel supports smart search.
 If multi-channels are selected, double-click on the channel window to display this
channel only on the screen, and then you can start using smart search function.
Step 5 Drag the pointer to select the searching area.
The grid area supports 22×18(PAL) and 22×15(NTSC).
Step 6 Click
The screen starts playing back the motional splices of recorded video for the selected
searching area.
Step 7 Click

5.9.5 Marking and Playing Back Video

You can mark the recording for somewhere important. Then you can easily find the marked
recording by searching time and mark name.
Marking a Video
Step 1 Select Main Menu > VIDEO, the video search interface is displayed.
Step 2 In the playback mode, click
The Add Mark dialog box is displayed. See Figure 5-103.
Step 3 In the Name box, enter a name.
Step 4 Click OK.
This marked video file displays in the Mark List.
Playing Back Marked Video
This function is supported on single-channel playback.
Step 1 In the CAME NAME list, select one channel.
.
.
to exit the playback.
.
Figure 5-103
Local Configurations 132