Servicing Information - Garmin GFC 500 Maintenance Manual

4.2 Servicing Information

Servicing of the GFC 500 Autopilot equipment is 'on condition'. In the event of system failure,
troubleshoot the GFC 500 Autopilot in accordance with Section 5.
4.2.1 On Condition Servicing
'On Condition' replacement and/or servicing should occur when an item exhibits conditions,
symptoms, and/or abnormalities defined in Section 5 of this manual. Replacement and/or
servicing should be made only after the technician troubleshoots the system to the extent
determined necessary by using the guidance in this manual along with common avionics
maintenance practices.
The remainder of this document is organized in the following fashion:
•
Section 4.3 lists maintenance requirements related to the GFC 500 Autopilot.
•
Section 6 gives instructions regarding the removal and replacement of GFC 500
equipment and parts.
•
Section 7 gives configuration and testing instructions to be accomplished if GFC 500
equipment or parts are removed or replaced.
•
Section 9 specifies system return-to-service procedures.
GFC 500 Autopilot with ESP Part 23 AML STC Maintenance Manual
190-02291-01
Page 12
Revision 1