Units Of Measure; Reference Publications; Table 1-1 - Required Documents; Table 1-2 - Garmin Reference Documents - Garmin GFC 500 Maintenance Manual

1.5 Units of Measure

Unless otherwise stated, all units of measure are English units.

1.6 Reference Publications

All of the documents listed in Table 1-1 and Table 1-2 are available for download through the
Dealer Resource Center section of the Garmin web site. Refer to Section 1.7 for details.
The documents listed in Table 1-1 are required by this maintenance manual to perform
maintenance on the GFC 500 Autopilot. It is the responsibility of the owner/operator to ensure
that the latest versions of these documents are used during operation, servicing or maintenance
of the airplane. Note: There is a model-specific installation manual addendum for each model
covered. Each has a different dash number. Refer to the Master Drawing List 005-01264-00 for
applicability.
Document Number Title
Master Drawing List GFC 500 Autopilot with Electronic Stability and Protection Part 23
005-01264-00
AML STC
190-02291-00 GFC 500 Autopilot with Electronic Stability and Protection Part 23 AML STC Installation
Manual
GFC 500 Autopilot with Electronic Stability and Protection Part 23 AML STC Model-
190-02291-XX
Specific Installation Manual Addendum
G5 Electronic Flight Instrument Pilot's Guide for Certified Aircraft
190-01112-12
The documents listed in Table 1-2 are recommended to be available during the performance of
maintenance activities.
Document Number Title
190-01112-11 Garmin G5 Electronic Flight Instrument Part 23 AML STC Maintenance Manual
190-02291-00 Garmin GFC 500 Autopilot with Electronic Stability and Protection Part 23 AML STC
Installation Manual
G5 Electronic Flight Instrument Pilot's Guide for Certified Aircraft
190-01112-12
Document Number Title
AC 43.13-1B FAA Advisory Circular, Acceptable Methods, Techniques, and Practices
– Aircraft Inspection and Repair
AC 43.13-2B FAA Advisory Circular, Acceptable Methods, Techniques, and Practices
– Aircraft Alterations
SAE ARP1870 Aerospace Systems Electrical Bonding and Grounding for Electromagnetic Compatibility
and Safety
Assembly and Soldering Criteria for High Quality/High Reliability Soldered Wire and
SAE AS4461
Cable Termination in Aerospace Vehicles
SAE AS50881 Wiring, Aerospace Vehicle
ASTM F 2490-05 Standard Guide for Aircraft Electrical Load and Power Source Capacity Analysis
GFC 500 Autopilot with ESP Part 23 AML STC Maintenance Manual
190-02291-01
Table 1-1 – Required Documents
Table 1-2 – Garmin Reference Documents
Table 1-3 – Other Reference Documents
Page 3
Revision 1