M16 (C) TANDEM TRAINER
MAINTENANCE MANUAL
3.4.2
LUBRICATING OPERATIONS
(See Fig. 3.4/1)
The rotor head needs to be greased regularly, as per maintenance schedule diagram, to avoid an abnormal wear of
the teeter bearings pn NKXR 15Z, bolts pn NAS 628‐52 and pn NAS 628‐30, bushes pn 057 and pn 053 on which the
control movements are articulated and of the notched gear pn 061.
There are three lubrication points (pn 059 (short) and pn 286 (long)) on the rotor head.
During lubrication, the movement of the controls, or of the teeter axle, allows the head to be greased more easily.
First clean the notched gear pn 061, then lubricate it with humidity‐proof grease and apply a protective film on the
teeth.
If the forks pn 051 and pn 052, on the square block pn 056, are burnished (black colour), the same type of
lubrication must also be done on these items.
3.4.3
SUGGESTED TYPES OF LUBRICANT
Bearings and NAS bolts
Notched gear and forks
3.5
ROTOR HEAD OVERHAUL
(See Fig. 3.5/1 ‐ 3.5/2)
WARNING:
The overhaul of the rotor head can only be done by the Manufacturer or at Facilities authorized
by the Manufacturer.
This overhaul includes specific checks of the wear of all the head components and the replacement of worn parts.
For any overhaul, the complete rotor head assembly (without alterations or tampering), the teeter bolt PAN 3009‐
136 and the longitudinal bolt NAS 628‐52 (see fig. 3‐4/1) must be sent (with previous agreement as to time and
conditions) to Magni Gyro or to an Authorized Facility.
3.5.1
INSTRUCTIONS FOR DISASSEMBLY OF ROTOR HEAD
(See Fig. 3.5/1‐3.5/2)
WARNING:
The following instructions describe how to remove the rotor head from the gyroplane.
The operator must follow carefully the operations and procedures described and, in case of any doubt
or problem, contact the Manufacturer. Magni Gyro will not be responsible for damages or breakages
due to the misinterpretation or to the wrong application of the given instructions.
ISSUE
A_November 2012
.
AMBER‐COLOURED GREASE SHELL DARINA R2
BLUE WATER‐REPELLENT GREASE
PAGE
45