3Com 5500G Configuration And Command Reference Manual page 34

34 Chapter 5: ACFP Configuration Commands
Description
n
Examples
Use the display acfp client-info command to display the information
about the specified ACFP client(s).
If the ACFP client ID is specified, the information about the specified
■
ACFP client is displayed.
If no ACFP client ID is specified, the information about all the ACFP
■
clients is displayed.
# Display the information about all the ACFP clients.
<SW5500G> display acfp client-info
ACFP client total number: 1
ClientID: 1
Description: IDS
Hw-Info: 1.0
OS-Info: Fedora release 6.0 (Zod)
App-Info: 2.0
Client IP: 1.1.1.1
Client Mode: ipserver
Table 1 Description of the display acfp client-info command fields
Field
ACFP client total number
ClientID
Description
Hw-Info
OS-Info
App-Info
Client IP
Client Mode
redirect mirror
Description
Total number of ACFP clients
Index of the client list
Description information of the
client application program
Hardware information of the
client
Operating system information
of the client
Application software
information of the client
Client IP address
Working mode supported on
the client:
■
■
■
ipserver: host mode
redirect: redirect mode
mirror: mirror mode