Table of Contents
Advertisement
36 Chapter 5: ACFP Configuration Commands
Examples
display acfp rule-info
Syntax
View
# Display information about all the active policies that specify the packet
inbound port as GigabitEthernet 1/0/1.
<SW5500G> display acfp policy-info in-interface GigabitEthernet 1/0/1 active
ACFP policy total number: 1
ClientID:
1
Rule-Num:
0
Exist-Time:
200
Start-Time:
12:00:00
Admin-Status:
enable
In-Interface:
GigabitEthernet1/0/1
Dest-Interface:
GigabitEthernet1/1/1
Table 2 Description of the display acfp policy-info command fields
Field
ACFP policy total number
ClientID
Policy-Index
Rule-Num
ContextID
Exist-Time
Life-Time
Start-Time
End-Time
Admin-Status
Effect-Status
In-Interface
Dest-Interface
display acfp rule-info { in-interface [ interface-type interface-number ]
| | policy [ client-id policy-index ] }
Any view
Policy-Index:
ContextID:
(s)
Life-Time:
End-Time:
Effect-Status: inactive
1
2097153
1000
(s)
18:00:00
Description
Total number of ACFP policies
Client ID, index of client list
Policy index
Number of rules under the
policy
Context ID
Indicates, in seconds, how long
the policy has existed
This value is refreshed every 10
seconds.
Policy expiration time, in
seconds
Policy start time
Policy end time
Policy administration status
Whether the policy is effective
Port through which the packet
is sent to the ACFP server
Port through which the packet
is sent to the ACFP client
Advertisement
Chapters
Table of Contents
