Table of Contents
Advertisement
Site Preparation
Installation and Verification
Installation
Verification
40
Once the installation has begun, it should progress in a timely
manner to completion. Delays due to inadequate site
preparation could cause loss of instrument use during the
warranty period. In extreme cases, Agilent Technologies may
ask to be reimbursed for the additional time required to
complete the installation.
The primary user and, if possible, all other users of the MSD
should be present during installation to receive familiarization
instruction from the Agilent Technologies service
representative.
The final step in the installation process is system verification.
Your Agilent Technologies service representative will test the
system against Agilent Technologies specifications as
documented for the product(s) or system(s) you have
purchased. (Not all tests are performed for every system.)
The Agilent Technologies service representative will not
test your system against your standards or samples.
Further, the Agilent Technologies service representative will
not set up your laboratory procedures. Assistance with
laboratory procedures can be obtained from your local Agilent
Technologies Applications Engineer (AE) on a consulting basis
at additional cost.
Site Preparation Guide
Advertisement
Table of Contents
