Finishing Material Thickness:
0-6 Inches Maximum
NOTICE: Remove finishing strips before firing appliance.
DECORATIVE FRONT
FINISHING MATERIAL
Figure 10.8 Folio/CF/Iron Age Inside Fit
FINISHING STRIP NOT USED
(See Figure 10.9 for
removal instructions)
NON-COMBUSTIBLE
FINISHING MATERIAL
FINISHING MATERIAL
Heat & Glo • 6000CLX-IFT, 8000CLX-IFT Installation Manual • 2506-980 Rev. B • 3/18
Removal of Finishing Strips
NOTICE: Remove finishing strips before firing appliance.
Remove glass frame assembly to access finishing strip
screws.
FINISHING STRIPS
FINISHING STRIPS
REMOVED
Figure 10.9 Removing Finishing Strips.
55