Setting The Speed; Checking The Sewing Pattern; Changing The Sewing Pattern - DURKOPP ADLER 512-211-01 Service Instructions Manual

11.6 Setting the speed

Important
Changes to the speed are only valid temporarily. For permanent changes
see chapter storing sewing patterns ( S. 43).
1. Press the Selection button until the Speed LED illuminates.
2. Press the +/- Function buttons until the desired speed is reached.

11.7 Checking the sewing pattern

1. Press the Selection button until the Sewing pattern shape LED illu-
 The Program display shows the current sewing pattern shape.
2. Press the Ready button to confirm the sewing pattern.
 The LED in the Ready button illuminates.
3. Press the foot pedal forwards.
 The clamp is lowered.
4. Press the +/- Function buttons to sew 1 stitch each.
 The Function display shows the current number of stitches.
5. Press the Reset button.
 The clamp is raised.
6. Press the Selection button until the Sewing pattern shape LED illu-

11.8 Changing the sewing pattern

1. Press the Selection button until the No. Pattern LED illuminates.
2. Press the +/- Function buttons until the desired sewing pattern number
3. Press the Ready button.
40
minates.
minates.
appears in the Function display.
Service Instructions 512-211-01/532-211-01 - 00.0 - 06/2016
Settings via software