2. Raise both clamp feet (2).
3. Loosen the screw (3) for the work surface (4).
4. Remove the work surface (4).
Fig. 9: Removing and inserting the throat plate (2)
(5) - Thread puller blade connecting rod
5. Open the hook flap ( S. 17).
6. Loosen the screw (6).
7. Unhinge the thread puller blade connecting rod (5).
Fig. 10: Removing and inserting the throat plate (3)
(7) - Throat plate
8. Loosen all 4 screws (8).
9. Remove the throat plate (7) upwards.
18
⑤
⑦
(6) - Screw
(8) - Screw
Service Instructions 512-211-01/532-211-01 - 00.0 - 06/2016
Work principles
⑥
⑧