Cisco ASA 5505 Getting Started Manual page 164

Configuring the Easy VPN Hardware Client
Check the Enable Easy VPN Remote check box.
Step 3
Step 4 To specify which mode the Easy VPN remote hardware client should run in, click
Client Mode or Network Extension Mode radio button.
Step 5 In the Group Settings area, specify the type of authentication the VPN devices
should use.
To specify that the VPN devices should use a pre-shared key for authentication,
click the Pre shared key radio button and enter a Group Name and Group
Password.
In the User Settings area, specify the User Name and User Password to be used
Step 6
by the ASA 5505 when establishing a VPN connection.
ASA 5505 Getting Started Guide
11-10
Chapter 11 Scenario: Easy VPN Hardware Client Configuration
78-18003-02