Starting Asdm - Cisco ASA 5505 Getting Started Manual

Chapter 8 Scenario: Configuring Connections for a Cisco AnyConnect VPN Client

Starting ASDM

Step 1
Step 2
Step 3
Step 4
Step 5
78-18003-02
This section describes how to start ASDM using the ASDM Launcher software.
If you have not installed the ASDM Launcher software, see Installing the ASDM
Launcher, page 5-5.
If you prefer to access ASDM directly with a web browser or using Java, see
Starting ASDM with a Web Browser, page 5-8.
To start ASDM using the ASDM Launcher software, perform the following steps:
From your desktop, start the Cisco ASDM Launcher software.
A dialog box appears.
Enter the IP address or the host name of your adaptive security appliance.
Leave the Username and Password fields blank.
By default, there is no Username and Password set for the Cisco ASDM
Note
Launcher.
Click OK.
If you receive a security warning containing a request to accept a certificate, click
Yes.
Implementing the Cisco SSL VPN Scenario
ASA 5505 Getting Started Guide
8-5