Advertisement
Getting started:
Thank you for buying the Stryder 50W daylight fresnel 3-point kit from Ikan. Carefully read the instructions and guide before
operating the products. The guide includes important product usage and maintenance information.
All the content of this manual is based on up-to-date information; technical data is subject to change without notice.
Safety Instructions:
1. (WARNING: YOU RISK GETTING ELECTROCUTED IF YOU DON'T FOLLOW THESE INSTRUCTIONS.) Connect the power
cable to the SW50 LED Light before plugging it into the power source.
2. Don't drag cables with excessive force. Any repairs on the products should be performed by Ikan technicians. When
dealing with the power cable, handle with care. Applying excessive force on the power connector can cause the power
supply to short or stop working.
3. Make sure that the power is off before connecting and changing the fixture head or disconnecting your cable from the
power source. We recommend using Ikan customized connecting cables and connectors to avoid electrical shock.
4. The voltage shouldn't exceed the value in the technical specifications. If the voltage is greater than or less than the regulated
values, it could damage the product.
Overview:
1. A 4-inch diameter Fresnel lens provides even, well-distributed light at a 60° beam angle.
2. The Fresnel Spot adaptor allows the beam to be reduced to a 30° spot.
3. Ultra-low noise and active cooling technology contribute to excellent thermal stability.
4. The bright LCD readout is easy to view, enabling the smooth adjustment of functions.
5. AC/DC power supply (110-220VAC / 15VDC)
Instructions:
The LED Fresnel housing of metal with a lightweight plastic body. It's easy to transport the fixture for any shoot. The SW50
structure is illustrated as follows:
Advertisement
