Lateral guides
Paper feed
without
address
printing
\text\etd\DA615/address
Two lateral guides are fitted on each side of the printer (media-feed and eject
sides). The following figure illustrates their positions. The broken lines indicate
appliances connected before and after the printer.
The chapter entitled "Accessories" gives an overview of the guide brackets which
can be ordered to suit your individual format sizes if those supplied with the printer
are not sufficient.
When using thick media, set the paper support (12) between the lateral guides as
required.
Place a sheet onto the feed side
–
Press the "PAP" key: The inserted sheet is pulled in, transported
through the printer and ejected.
Never touch the internal parts of the printer while it is
running !
3.4
Addressing media
DA615 instruction manual