Yamaha PW45 Original Instructions Manual page 16

INSTRUMENT AND CONTROL FUNCTIONS
S-Pede Kit Manual (2016).indd 13
2 Power "On/Off"
Power switch
Each time you press the power switch, the power switches
between "On" and "Off".
When you turn on the power, all of the displays light up.
After that, the battery capacity indicator, speedometer, as-
sist power meter, the function display such as average bi-
cycle speed, and "STD" of assist mode indicator, and
clock are displayed.
TIP
• When you turn on the power, the assist mode is auto-
matically set to Standard mode.
• Keep your feet off the pedals when turning on the dis-
play unit. Also, do not start riding immediately after
turning on the display unit. Doing so could weaken the
assist power. (Weak assist power in either of these
cases is not a malfunction.) If you did either of the
above by accident, remove your feet from the pedals,
turn on the power again, and wait a moment (approxi-
mately two seconds) before starting to ride.
13
2015/06/24 9:22:07