IMPORTANT SAFETY WARNINGS (CONT.) • Use caution when working with voltages above 60V DC or 25V AC RMS. Such voltages pose shock hazards. • To avoid false readings that can lead to electrical shock, replace batteries if a low battery indicator appears. •...
Dangerous Levels Double Insulation Safe for disconnect from (Protection to Class II) live conductors OVERVIEW CAT III 600V 600A RANGE MAX/ Zero PEAK INRUSH DL489 True RMS TEMP CATII 1000V CATIII 600V GlobalTestSupply www. .com Find Quality Products Online at: sales@GlobalTestSupply.com...
Page 6
OVERVIEW (CONT.) A. Clamp: Measure inductive AC/DC current. Opens to 1.25” (31.7mm). B. Conductor Alignment Marks: Use to aid the visual alignment of a conductor when measuring inductive amperage. Greatest accuracy is achieved when the conductor inside the clamp is centered at the intersection of these marks. C.
• Press x1 = (lower) MAX/ Zero INRUSH • Press x2 = (lower) PEAK µA DL489 True RMS • Press and hold = (upper) TEMP CATII 1000V CATIII 600V • Do not attempt to measure more than 600A DC. Features:...
CAT III 600V 600A RANGE MAX/ Zero INRUSH PEAK DL489 True RMS • Default = DC Zero • Press and Hold = LRA Inrush TEMP CATII 1000V CATIII 600V Select DC current. • Press to zero any offset in Amps DC.
RANGE Alert • Default = MAX/ Zero PEAK INRUSH • Press x1 = DL489 True RMS • Press and hold = • Press and hold x1 = TEMP CATII 1000V CATIII 600V WARNING • Use CATIII rated test leads or higher.
600A RANGE • Default = MAX/ Zero PEAK INRUSH • Press x1 = DL489 True RMS • Press and hold = • Press and hold x1 = TEMP CATII 1000V CATIII 600V Use CAT III rated leads or higher. Press the AC/DC volts button to select AC voltage, press and hold the button for Frequency and Duty Cycle modes.
TEMP CATII 1000V CATIII 600V The UEi LRA Inrush is programmed to properly capture the starting current for compressor motors. • Select AC Amps. • Select the range capable of capturing the maximum value. • Press and hold the DC Zero/ LRA Inrush button – INRUSH will now be shown on the screen.