Related Manuals for UEi DL99B
Summary of Contents for UEi DL99B
- Page 1 INSTRUCTION MANUAL DL99B 1-800-547-5740 • Fax: (503) 643-6322 www.ueitest.com • email: info@ueitest.com...
-
Page 2: Features Include
This instrument is designed and tested in accordance with: • DO NOT attempt to measure any voltage that exceeds 1000 volts DC or AC-RMS with this meter - UEi offers numerous alternatives IEC Publication 1010-1 (Overvoltage ca t e g o ry III), the safety requirements... -
Page 3: Controls And Indicators
400 volts are applied. Push and hold for 5 seconds to activate the Note: A low battery will adversely affect accura cy worklight and back light of the display. DL99B-MAN P. 2... -
Page 4: Auto Power Off
AC and DC volts functions to allow quick measurements of various the red lead into the “V/ / “ port and the black lead into the line voltages with the best possible resolution. All other functions. “COM” port. DL99B-MAN P. 3... -
Page 5: Measuring Voltage
2. Place one probe to each side of the circuit to be tested - If approximately 40 or less resistance is in the circuit, the meter sounds a continuous tone - The resistance value (up to 400 ) will be displayed regardless of the continuity tone. (Fig 1) DL99B-MAN P. 4... -
Page 6: Periodic Service
1. Remove the screw from the battery compartment cover on the back (lower half) of the meter and lift the cover (Fig 2). 2. Remove and discard the old battery. Always dispose of old batteries promptly in a manner consistent with local disposal regulations. DL99B-MAN P. 5... -
Page 7: Measurement Limits
NOTE: This unit contains no user serviceable parts beyond those listed in table above. In the event your instrument is physically damaged or does not function properly after taking the listed action, please return the instrument to UEi following the warra n ty and service instructions. DL99B-MAN P. 6... -
Page 8: Standard And Optional Accessories
Soft Carrying Case ........AC319 DL99B-MAN... -
Page 9: Limited Warranty
True RMS Clamp-On Meter Limited Warranty The DL99B is warranted to be free from defects in materials and workmanship for a period of three years from the date of purchase. If within the warra n ty period your instrument should become inoperative from such defects, the unit will be repaired or replaced at UEi’s option.