Advanced Poly-Packaging T-1000 Operation Manual page 10

Available Options
Although the T-1000-S14 is equipped with many "built-in" options, various auxiliary options and
equipment can easily be added for special purpose packaging. The following options may be purchased
from Advanced Poly-Packaging, Inc:
AF-10 Accumulating Funnel: A special purpose funnel that collects and holds product until it is ready to
be dropped. A funnel to help contain the product can also be inserted.
Bag Deflator: This option quickly mounts to the sealer bar and squeezes the air from the bag while
sealing.
Bag in Bag Option: A conveyor feeds bagged product to a second bagger to be bagged again.
Bag Out Sensor: If the bag material ends, a message will be displayed indicating that the machine is out
of bags or that a threading or web breakage issue has occurred.
Base Height Adjustment: An electronic mechanism that raises or lowers the base of the bagger, allowing
for more versatility and convenience. Without this option, the operator must raise or lower the bagger
manually.
BO-20 Bag Open Detector: This option will detect whether or not a bag is blown open, or whether or not
a funnel is inserted into the bag for validation that the bag is ready to receive product.
BO-30 Bag Opening Device: This device enters the bag with one or more "fingers" and pulls the bag
open to a stop.
BV-10 Barcode Verifier: Verifies that a barcode is readable. If no barcode is detected, or if a barcode is
not correctly formatted (as per software settings in the barcode verifier), then a "No Read" message will
be displayed.
CF-10 Counting Funnel: This option automatically cycles the bagger when a preset number of parts
have fallen through the funnel.
CS-10 Compartment Seal: Seals the bag twice to create two separate compartments within the same bag.
DF-10 Diverting Funnel: This feature is used to count bags from the bagger and divert them for further
packaging operations, including counting into cartons.
Dual Printing: Special programming allows the T-1000-S14 to operate with both the Next Bag Out
printer and an offline printer in order to print on both sides of the bag. The offline printer is mounted
upside down on the back of the bagger.
9