Cisco 890 Series Installation Manual page 17

Cisco 860, 880, 890 Series
Verifying the Initial Configuration
For more information, refer to the
Cisco 860, 880, 890 Series
This section provides instructions for initial configuration of the Cisco 860 series, 880 series, and 890
series ISRs. You may also initially configure your router by using the Cisco IOS command-line interface
(CLI) or by using the setup command facility. To create the initial configuration, the setup command
facility prompts you for basic information about your router and network.
This section contains the following topics:
•
•
•
•
•
Note Some SKUs may not include a default configuration file. If your router does not have a default
configuration file, go to the
settings.
Cisco Configuration Professional Express
After you connect the cables and power up the router, we recommend that you use the Cisco
Configuration Professional Express web-based application to configure the initial router settings.
For instructions on how to use Cisco Configuration Professional Express to configure the router, see
Cisco Configuration Professional Express User's
Cisco IOS CLI
To configure the initial router settings by using the Cisco IOS CLI, you must set up a console connection.
For instructions on how to set up a console connection, see the
Console Port" section on page
To configure the initial router settings using the Cisco IOS CLI, follow these steps:
Set up a console connection to your router. The following message is displayed:
Step 1
...
router con0 is now available
Step 2 Press Return. The following message is displayed:
Cisco Configuration Professional Express (Cisco CP Express) is installed on this device.
This feature requires the one-time use of the username "username1"
with the password "password1." The default username and password have a privilege level of
15.
Cisco Integrated Services Router Hardware Installation Guide
4-2
Cisco Configuration Professional Express, page 4-2
Cisco IOS CLI, page 4-2
Setup Command Facility, page 4-4
Verifying the Initial Configuration, page 4-6
Initial Configuration of the Wireless Access Point, page 4-7
"Setup Command Facility" section on page 1
"Verifying the Initial Configuration" section on page
Guide.
3-16.
Chapter 4 Initial Configuration
4-6.
to configure the initial router
"Connecting a Terminal or PC to the
OL-23125-02